Sam4s SPS-500 Especificações descarregar pdf (Página 89)

Sam4s SPS500 Programming Manual - 87 -

Printer Tables and KV Routing

The printing system of an SPS-500 register or system of registers is completely flexible. Up to 40

external printers can be defined and connected to any available serial port on any register within a

system. This is in addition to the inbuilt system printer. Multiple printer functions can be assigned to the

same printer, giving added flexibility. Before programming these options, it is necessary to have defined

the port the printer is connected to within S mode if using external printers.

The following printer options are explained following

 System Printer Configuration Every printer used within the system must be allocated a printer number

 Kitchen Video Routing The video display system must be activate within this menu option

 Kitchen Printer Routing Each route required for printing must be allocated a printer number

 Receipt Printer Routing Which register is using which receipt printer is set within this option.

 Detail Printer Routing Which register is using which detail printer is set within this option

System printer configuration

A list of all external printers and the port they are connected to is allocated within this option. The printer

number is then used to allocate receipt, detail, and kitchen printer settings.

Printer

This is a sequential number generated by the system that will be used to refer to

the external printer throughout the system.

Descriptor This is the name of the printer i.e Main Kitchen, this is printed on order tickets.

Main Reg#-Port# This is the register number and port the printer is physically connected to.

Backup Reg#-Port# The system allows entry of backup printer, and register.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 133 134

Sem comentários

Sam4s SPS-500 Especificações Página 89